Hidrofiltr GFA-1000

In-house production of hydrofilters provides endless opportunities for technical improvement of the equipment. The GFA-1000 stainless steel water filter with built-in droplet collector is the most compact and inexpensive of the automatic water filters, but it has all the advantages of much more powerful models. It has all the functions of an automatic hydrofilter:

Stages of the hydrofilter:

Two water curtains moisten and extinguish sparks and flames and cool the smoke. The extinguished sparks, ash and soot are deposited on the bottom of the hydrofilter by the water pressure.

Then the flow of hot air and smoke over the water is reversed by 180 degrees. This finally settles out the extinguished sparks, ash and soot in the water due to inertia.

A ‘dry’ ceramic labyrinth captures airborne droplet suspension and residual contaminants.

A stainless steel droplet trap captures residual water suspension, drying the airflow.

At the outlet of the hydrofilter, the air is cleaned of soot, grease, ash, some smoke and odour, and cooled to +30...+50°C.

Fire safety and air purification with a hydrofilter:

• sparks - 100% fire safety,
• fat, soot - 95%,
• odour and smoke - 60%,

Process automation:

• water circulation system;
• automatic washing with adjustable time relay;
• pump for filling detergent into the system;
• detergent dosing relay;
• automatic filling and water level control;
• control and automatic topping up when the water temperature is exceeded;
• automatic draining of dirty water when the hydrofilter is switched off;
• availability of a flow mode in the absence of electricity;
• air overheating alarm when the hydrofilter is switched off and on;
• alarm in case of low water pressure at the nozzles;
• availability of a stainless self-washing coarse water filter in the system;
• access to all elements inside the hydrofilter (nozzles, level sensor, Raschig rings, drip trap, bottom of the hydrofilter) from the front of the hydrofilter through sealed inspection hatches.